BANVIE Car Immobilizer Transponder Bypass Module for Chip Key (a Spare chip...

Description

BANVIE Car Immobilizer Transponder Bypass Module for Chip Key (a Spare chip Key is Required ! only for chip Key, not fit for Other Immobilizer Way)
Product Details
Manufacturer: BANVIE
Brand: BANVIE
Item Weight: 2.4 ounces
Product Dimensions: 3.35 x 2.36 x 0.98 inches
Is Discontinued By Manufacturer: No
Manufacturer Part Number: 43217-157413
It is a bypass module to bypass the chip key only, please note this one is not a remote starter! security design for chip key immobilizer, ONLY compatible with most cars with CHIP KEY, will not work for other immobilizers .
Bypasses immobilizer for engine chip lock. simple two-wire connection for super easy installation,
If your key is bigger than this unit case, please take out the chip or whole PCB to the case.
Bypass the chip immobilzer in factory OEM key fob for supporting remote starter \ car alarm \ engine start/stop push button \ Copy key.
PLEASE NOTE: 1. a spare key with chip is required to go inside the box, if the key is bigger than the box, need to take out the PCB of key to the box, then pu; 2. wheel steering lock need to be released if your car with it(method see the Ninth Image and Description.
It is a bypass module to bypass the chip key only, please note this one is not a remote starter!!! Security design for chip key immobilizer, ONLY compatible with most cars with CHIP KEY, will not work for other immobilizers. How to install the bypass module?(Please note a spare key is required to go inside the Box, if your original key is too big, please open it to get the chip unit ) Some cars have RFID car key (chip key), if you want to remote start car, you need to have a bypass module, otherwise the car engine can’t started. Main Steps: 1) Remove the key screws of bypass module control box, open the control box; 2) Insert the OEM car key or key PCB or Key chip under the wire; 3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip; 4) Tighten the screws and lock the case; 5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal; 6) Fasten the sensing wires to the car key socket with glue; 7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right; 8) Place the bypass module in a hidden place.