Bolt On Climbing Holds, Small Oven Mitt Jugs

Description

These holds are easy to grab and work well on any wall angle especially overhangs. This set includes 4 BOLT ON holds meant to be fastened to your climbing wall using 3/8" Bolts and T-Nuts. Every hold is embedded with steel washers for added strength and durability!
This set includes 6 BOLT ON holds meant to be fastened to your climbing wall using 3/8" Bolts and T-NUTS.
If you have a wall thickness other than 3/4" and/or need T-Nuts please let us know so we can help you out.
Recommended Bolt Lengths and Quantities for 3/4" Plywood: 4 Bolts 2" Long.
We also have screw on versions of these holds, if you'd rather have the screw on holds please send us a message or note when you order and we'll be sure to get you taken care of.
Have questions? Please scroll down to view our FAQs. We’ve listed information about us, our holds and some suggestions to get you started.
Please check out our shop page at
https://www.ebay.com/str/jznclimbingholds
for more climbing holds and sets!
FAQ:
Warranty, Damages and Issues
All Holds come with a lifetime breakage warranty. The warranty does not cover chips and over abuse.
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Texture
Our texture is similar to what you would find in a climbing gym. It's sticky but not too abrasive.
Screw on Vs. Bolt on Holds
Please check the listing titles for either “screw on” or “bolt on”
Screw on holds are great if you don’t want to deal with T-nuts or if you want to fill in space between your bolt on holds. They can be fastened directly to the wall using #8 wood screws.
Bolt on style holds are primarily fastened using 3/8” bolts. They’re great for people who want to change their routes often but will require an initial investment and installation of T-Nuts.
Custom and Bulk Orders
We're able to do custom orders and discounts for bulk orders only(k+)
Sizing details
Please use the carabiner in the photos as a size reference.
What fasteners do you provide
3/8" diameter socket cap bolts and/or #8 Phillips head countersunk wood screws.
Our fasteners have a black oxide finish ideal for indoor use.
If you order fasteners for an additional charge you'll receive the correct quantities and bolt lengths selected based on wall thickness (3/4", 1", or 1.5").
For screw on holds we make sure the screw protrudes 1" or more from the back of the hold.
Climbing wall Info
We used a sturdy frame of 2x6 and 2x4 pressure treaded lumber and then mounted ¾” thick plywood fitted with a grid of 3/8”-16 T-nuts for the climbing surface. The T-nuts are not necessary if you are using Screw on Holds only.
Disclaimer
Rock climbing is inherently dangerous so please do so at your own risk. Any information provided is only a suggestion. You are responsible for creating a safe climbing wall/area for you and anyone using it. We are not responsible for any injuries or complications caused from using our products.
Who we are and how we make our holds
We are small team of engineers and commercial gym route setters with over 10 years of experience in engineering design and manufacturing. We do things a little differently by using Computer Aided Design and 3D Printers to make our shapes and casting components. This process not only makes our holds look and feel amazing but is extremely efficient making it more environmentally sustainable.
Our holds are manufactured using 100% high strength polyurethane. We embed the holds with Grade 8 flat washers and/or stainless steel countersunk washers for extra strength and durability. The Polyurethane we use is Alumilite RC-3, specifically formulated for rock climbing holds (Tensile Strength (ASTM D-638) (psi) 5,000).