Flashlogic FL-CAN Immobilizer Bypass Same as Compustar iData ALCA ByPass

Description

FlashLogic FLCAN Multi-Platform Canbus Enabled Doorlock Interface Car Bypass
Sames as i-data ALCA
The FlashLogic FLCAN Databus Interface Module communicates with your vehicle's Databus to provide plug-in capability between the module, and the Code-Alarm security system for various functions. Typical functions include passive anti-theft bypass (transponder, VATS, Passlock, PK3,etc), factory keyless entry controls, factory alarm arm/disarm, door trigger status, tach signal, dome light supervision, trunk/hatch open. Compatibility and available functions vary depending upon year, make, and model of vehicle.
Note: Before installing, the FlashLogic module will need to be flashed/programmed for your specific vehicle via web-update using the FLPROG program cable. The FLPROG cable is NOT included with this.
We do not flash modules prior to shipment at this time.
Whats Included:
FLCAN module
19" DBI port cable (4-pin with black/red connectors)
19" DBI port cable (4-pin with black/brown connectors)
24" Standard wiring harness (4-pin with black connector and red/black/blue wires)
18" Wiring harness (with black connector on one end and bare wires on other end)
24" Wiring harness (with blue connector and 3 white wires)
24" Wiring harness (with white connector and 3 yellow wires)
24" Wiring harness (with white connector and 7 orange/pink wires)
24" Wiring harness (with white connector and 6 blue/green/gray wires)