Fortin EVO-CHRT6 Bypass Module Combo for Chrysler Vehicles EVO-ALL & THAR-CHR6

Description

EVO-ALL Features:
3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control
EVO-ALL Features:
3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control port for TB-series modules
THAR-CHR6 Features:
EVO-ALL T-Harness for Push-to-start/Key Chrysler vehicles
T-Harness connectivity with EVO-ALL
on 2013+ "Push-to-start" & "Tip-Key" Chrysler v
ehicles
T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
Some wires may still need to splice/cut to complete installtion
** These units required to be flashed/updated with a flashlink2 cable in order to set them up to use with your OEM key fob remote. Out of the box this unit will not funtion with your OEM remotes.
**  T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
**  Check manufactorers web site to make sure your vehicle is comatible with this system