Fortin EVO-GMT2 PRELOADED MODULE & T-HARNESS COMBO FOR CADILLAC, CHEVROLET & GMC

Description

Fortin EVO-GMT2
PRELOADED MODULE & T-HARNESS COMBO
FOR CADILLAC, CHEVROLET & GMC
The EVO-GMT2 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start
interface with T-Harness combo module for 2007+ Cadillac, Chevrolet & GMC full size vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture
with 10 separate communication ports that provide more complete functionality on every supported vehicle.
ADVANCED FEATURES  REMOTE STARTERS  ALARM SYSTEMS  IMMOBILIZER BYPASS  GPS SYSTEMS
ADVANCED FEATURES
Built-in advanced features for installations.
BUILT-IN ALARM SYSTEM OEM REMOTE MONITORING STAND ALONE REMOTE
Fortin EVO-GMT2
PRELOADED MODULE & T-HARNESS COMBO
FOR CADILLAC, CHEVROLET & GMC
The EVO-GMT2 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start
interface with T-Harness combo module for 2007+ Cadillac, Chevrolet & GMC full size vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture
with 10 separate communication ports that provide more complete functionality on every supported vehicle.
ADVANCED FEATURES  REMOTE STARTERS  ALARM SYSTEMS  IMMOBILIZER BYPASS  GPS SYSTEMS
ADVANCED FEATURES
Built-in advanced features for installations
.
BUILT-IN ALARM SYSTEM OEM REMOTE MONITORING STAND ALONE REMOTE STARTER
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility.
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems.
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
PRODUCT SPECIFICATIONS
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (Passlock, MUX).
PARTS INCLUDED
1 x EVO-ALL control module (firmware preloaded).
1 x Warning label.
1 x 4 Pin Fortin 2-way data-link harness.