Magnetic Angled Coral Frag Photo Booth - 3D Printed - Many Colors

Description

This is a magnetic angled coral photo booth. This booth helps helps you take pictures of your frags. It has a built in 30° angle on the bottom which props up your frags making it even easier to take pictures. It measures approximately 6″ x 4″ x 3″ and can hold up to 11 corals. It is open on the front, towards the glass, with an angled bottom allowing you to take direct pictures of the frags without immersing the camera in your tank.
The magnets are pre-coated resin neodymium N50 high strength magnets capable of holding the rack on less than 1/2" glass (1/2" will probably work).
High quality N50 neodymium magnets.
Designed for holding 11 frag plugs.
Printed out of PLA.
One side open for viewing and picture taking from the front.
It is constructed solid with no holes as this is not meant to be a holding container but rather temporarily housing the frags for pictures. If you want an actual frag box you can check out the one I make
here
.
I can print the box in a variety of colors. If no color is specified in the order note, a black one will be sent out by default.
Also, please note that these are made on demand. Allow a few days from the day of purchase till I ship out.
Check my other listings for 3D printed reefing equipment. I will accept reasonable offers for multiple things bought from me.
Clear PLA, i.e. PLA with no color pigmentation added which makes it translucent, is also available. Leave a note with your order that you want "Clear" as color if desired.
Note
: I offer these in black PETG as well. If you would like that option, please contact me. There will be a 25% increase in price for this material.
Please note that these are 3D printed parts. That means that the surface finish quality of the part will not be directly comparable to an injection molded part. Although not very common, there might be small surface finish defects, or rough spots. The goal is to have a fully functional, as described part. This disadvantage to 3D printing is reflected on my pricing as well. Polished surface finishes, is definitely something that can be achieved to a certain degree with 3D printed parts, but it's a time consuming process, something that definitely cannot be offered for the price range my products go for.  Please also note that when dealing with acrylic, although care will be exercised, there is a chance of a small defect or scratch. It won’t be anything serious but rather minute in nature and invisible in water.
Material Selection: Some arguments have been made about pigmentation in PLA filament and it's effects in water in case of leeching. You can order “Clear (transluscent)” parts which is PLA free of any pigments. Just leave a note in your order that you want "Clear" parts. I have personally used black PLA in my tank for many years with nothing but success. You can also ask for PETG if you are concerned about durability of the PLA part. Just contact me.
If you have a color preference please make sure to put it on the "note to seller" field during checkout. If you do not do that, I
will use the default black color and
I may not be able to honor any request you have after your payment is complete.