NEW IN BOX 4 Stage Reverse Osmosis Deionization Water Filtration System

Description

NEW NEVER USED NEVER OPENED!!!
Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we provide a variety of RO/DI systems that will fit your aquarium's needs.
4 Stage RO/DI Systems - Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants.
4 STAGES OF FILTRATION
Stage 1
Purtrex 5 Micron Depth Sediment Filter NSF Certified
Sediment filters trap debris and other free-floating particles that would normally clog expensive carbon blocks and foul membranes. Purtrex filters are a true depth filter with a graded density that progressively gets tighter through as water passes through the filter allowing them to last longer than the competitors.
Stage 2
BRS 5 Micron VOC Block NSF Certified (Chlorine 15,000 @ 1 GPM)
Our VOC carbon blocks are specially formulated to remove and reduce chlorine and volatile organic compounds from household water.
Stage 3
75 GPD Dow Filmtec Membrane NSF Certified (up to 99% rejection rate)
DOW is hands down the industry leader for residential RO membranes. The 75 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW's membrane only requires 50 PSI of feed pressure to operate efficiently.
Stage 4
Nuclear Grade Color-Changing Deionization Resin
Deionization resin is the final stage of the RODI system and will polish your water down to 0 TDS. The DI resin is a mixed bed with a color changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to it should be replaced.
4 Stage Value RO/DI System Recommended Conditions:
Minimum Water Pressure - 50 PSI
Max Water Pressure - 90 PSI
Recommended Water Temperature - 77°F
Recommended Max TDS - <300ppm
Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production of product water, with excess production of waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.
*DOW Filmtec 75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;
Source Water Pressure - 50 PSI / Membrane
Source Water Temperature - 77°F
Source Water TDS - 250ppm Softened Tap Water
Recovery - 15%
Minimum Salt Rejection - 96%