Titanium One Digital Inline TDS Meter - AutoAqua

Description

The Titanium One TDS Meter is actually the smallest inline TDS meter available in the aquarium hobby. It uses a titanium probe, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water.
The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium.
The Titanium One TDS monitor can be used to check the quality of your inlet or outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium One is ideal for the job with an accuracy of +/- 2%.
It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy.
To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either. The Titanium One uses a common CR2032 lithium battery so when it comes time to change it, you should have no problem finding a replacement. Under normal use, the battery should last a year or more! There is also a low battery indicator on the display so you’ll never be left high and dry.
MODEL: TDS-100
Check out these awesome features:
Simple installation with a ¼” push connect union tee included
High quality titanium probe
Small and compact design
Auto-off function
Can be calibrated
Low battery indicator
The Titanium One TDS-100 includes:
Digital Inline TDS - Titanium One x1
¼” Push Connect Union Tee x1
Titanium One by the numbers:
Range : 0-999 ppm
Resolution : 1 ppm
Accuracy : +/- 2%
Power Source : CR2032 lithium battery x1
Battery Life : 1 year